Absorption Percentage
Design and Develpoment of Polymer Based Composite in Order to Minimize the RCS [Volume 7, Issue 3, 2020, Pages 1047-1056]
ABS/TPU
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
Accumulative roll bonding
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Acid aging
Experimental investigation of mode I delamination growth in unidirectional E-glass/vinyl ester composites on acid aging [Volume 7, Issue 1, 2020, Pages 731-739]
Acoustic emission
Applying acoustic emission to investigate failure mechanisms on bending of polymer-based composite sandwich panels [Volume 7, Issue 3, 2020, Pages 1029-1039]
Active Control
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2020, Pages 1243-1254]
Additive manufacturing
Effect of processing parameters on tensile properties of FDM 3D printed of PLA specimens [Volume 7, Issue 2, 2020, Pages 855-862]
Additive manufacturing
Application of cotton/epoxy laminated composites to fabricate the uni- and bi-directional cosine corrugated cores sandwich panels [Volume 7, Issue 2, 2020, Pages 863-872]
Adhesion Strength
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Adhesive single lap joint
Strength improvement by mean of adherend notching and adherend taper in the adhesive single lap joints [Volume 7, Issue 2, 2020, Pages 941-948]
AISI 304L – Hastelloy X composite
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
Al+B2O3+Si+WO3 system
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System [Volume 7, Issue 2, 2020, Pages 917-930]
Aluminium oxide
Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Energy Storage Capacity [Volume 7, Issue 4, 2020, Pages 1137-1144]
Aluminothermic combustion synthesize
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System [Volume 7, Issue 2, 2020, Pages 917-930]
Aluminum
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Aluminum Foam
Experimental study of the effect of impact shape and skin layout on the behavior of aluminum foam core sandwich panels at low velocity impact load [Volume 7, Issue 4, 2020, Pages 1153-1162]
Aluminum Foil
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Anti-bacterial properties
The Study of The mechanical, Thermal and Antibacterial Properties of PLA/Chitosan/TiO2 nanocomposite film [Volume 7, Issue 1, 2020, Pages 747-752]
Axially functionally graded material
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2020, Pages 1177-1188]
Axially moving and rotational beam
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2020, Pages 1177-1188]
B
Ballistic Limit Velocity
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
Basalt
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
Basalt
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2020, Pages 1145-1152]
Basalt fibers
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
Basalt fibers
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
Bending
Applying acoustic emission to investigate failure mechanisms on bending of polymer-based composite sandwich panels [Volume 7, Issue 3, 2020, Pages 1029-1039]
Brake pad composite
Effect of Steel Fibers on Wear Mechanism of Semi-Metallic Brake Pad Composite [Volume 7, Issue 1, 2020, Pages 791-799]
Buckling
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique [Volume 7, Issue 2, 2020, Pages 813-822]
C
Carbon Nanotube
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Carbon Nanotube
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2020, Pages 1189-1196]
Chemical reaction
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Chitosan
Preparation and optimization of Chitosan-Montmorillonite nanocomposite formulations containing Curcumin [Volume 7, Issue 1, 2020, Pages 714-722]
CLT
Investigation of the Effect of 3D printing parameters on shape-shifting of flat sturctures to Three-Dimensional Shapes [Volume 7, Issue 4, 2020, Pages 1271-1278]
Cobalt oxide
Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Energy Storage Capacity [Volume 7, Issue 4, 2020, Pages 1137-1144]
Cohesive joint
Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading [Volume 7, Issue 4, 2020, Pages 1171-1176]
Cohesive Zone Length
Comparison of numerical and analytical cohesive zone length models in the delamination of composite laminates [Volume 7, Issue 4, 2020, Pages 1235-1242]
Cohesive zone model
Comparison of numerical and analytical cohesive zone length models in the delamination of composite laminates [Volume 7, Issue 4, 2020, Pages 1235-1242]
Cold spray
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Composite
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Composite
Investigation of the Effect of Graphene Nano Plates and Carbon Nanotubes on the Improvement of Mechanical Properties of Aluminum Matrix Nanocomposites [Volume 7, Issue 4, 2020, Pages 1197-1206]
Composite cylindrical shell
Analytical investigation of Low-Velocity Oblique Impact on Composite Cylindrical Shells [Volume 7, Issue 3, 2020, Pages 1106-1119]
Composite grid structure
Introducing novel sandwich panels based on of cork/polyurethane foam hybrid core and composite grid structure for marine applications [Volume 7, Issue 3, 2020, Pages 1064-1075]
Composite laminate
An Experimental Investigation on the Effect of 3-D Stresses at Free Edges on the Failure of Composite Laminates under Distributed Lateral Load [Volume 7, Issue 2, 2020, Pages 843-854]
Composite patch
Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading [Volume 7, Issue 4, 2020, Pages 1171-1176]
Composite plate
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique [Volume 7, Issue 2, 2020, Pages 813-822]
Composite plate reinforced by carbon nanotube
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2020, Pages 1243-1254]
Composite Sandwich Sheet
Experimental study of the effect of impact shape and skin layout on the behavior of aluminum foam core sandwich panels at low velocity impact load [Volume 7, Issue 4, 2020, Pages 1153-1162]
Compression Hopkinson test
Finite element simulation of Hopkinson compression test to investigate the dynamic behavior of composite materials [Volume 7, Issue 4, 2020, Pages 1263-1270]
Concrete
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy fiber and Polymer Concrete [Volume 7, Issue 4, 2020, Pages 1255-1262]
Conductivity
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Conical sandwich shell
Vibration analysis of truncated conical sandwich shell with porous FG core in different thermal loading [Volume 7, Issue 1, 2020, Pages 694-704]
Contact force history
Analytical investigation of Low-Velocity Oblique Impact on Composite Cylindrical Shells [Volume 7, Issue 3, 2020, Pages 1106-1119]
Cork
Introducing novel sandwich panels based on of cork/polyurethane foam hybrid core and composite grid structure for marine applications [Volume 7, Issue 3, 2020, Pages 1064-1075]
Coupled vibrations
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2020, Pages 1177-1188]
Creep
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
Creep
Creep strength of hybrid composites used in power transmission line conductors [Volume 7, Issue 4, 2020, Pages 1227-1234]
Deflection
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
Delamination
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique [Volume 7, Issue 2, 2020, Pages 813-822]
Delamination in Composites
Comparison of numerical and analytical cohesive zone length models in the delamination of composite laminates [Volume 7, Issue 4, 2020, Pages 1235-1242]
Developing Homotopy Perturbation Method
Developing homotopy perturbation method to investigate the nonlinear vibration of a Porous FG-Beam subjected to the external excitation [Volume 7, Issue 2, 2020, Pages 907-916]
Different temperature condition
Experimental investigation of the effect of shape memory alloy wire embedding on the low-velocity impact behavior of fiber metal laminates composites at different temperatures [Volume 7, Issue 3, 2020, Pages 1057-1063]
Divergence and flutter
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2020, Pages 1177-1188]
DMA
Creep strength of hybrid composites used in power transmission line conductors [Volume 7, Issue 4, 2020, Pages 1227-1234]
Ductility
Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM [Volume 7, Issue 4, 2020, Pages 1207-1216]
Dynamic behavior of composite
Finite element simulation of Hopkinson compression test to investigate the dynamic behavior of composite materials [Volume 7, Issue 4, 2020, Pages 1263-1270]
Dynamic Loading
Non-linear response of Fiber Metal Laminates subjected to temperature and dynamic loadings [Volume 7, Issue 1, 2020, Pages 768-778]
E
Elastic foundation
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2020, Pages 1243-1254]
Electromagnetic
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Experimental study
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Experimental Validation
An Experimental Investigation on the Effect of 3-D Stresses at Free Edges on the Failure of Composite Laminates under Distributed Lateral Load [Volume 7, Issue 2, 2020, Pages 843-854]
F
Fatigue crack propagation
Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading [Volume 7, Issue 4, 2020, Pages 1171-1176]
FEM
A novel smeared method for investigating the free vibrations of sandwich conical shells with lattice cores [Volume 7, Issue 4, 2020, Pages 1163-1170]
FEM
Global buckling load calculation of the of sandwich conical shells with lattice cores subjected to axial compression loading using a novel smeared method [Volume 7, Issue 4, 2020, Pages 1217-1226]
Fiber-metal laminate composite
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
Fiber–metal laminates
Non-linear response of Fiber Metal Laminates subjected to temperature and dynamic loadings [Volume 7, Issue 1, 2020, Pages 768-778]
Fiber Metal Laminates (FMLs)
Experimental investigation of the effect of shape memory alloy wire embedding on the low-velocity impact behavior of fiber metal laminates composites at different temperatures [Volume 7, Issue 3, 2020, Pages 1057-1063]
Filling Pattern
Investigation of the Effect of 3D printing parameters on shape-shifting of flat sturctures to Three-Dimensional Shapes [Volume 7, Issue 4, 2020, Pages 1271-1278]
Finite element modeling
Resistance of Singly-Curved Sandwich Shells with Metal Microlattice Core under Transverse Loading [Volume 7, Issue 2, 2020, Pages 897-906]
First-order Shear Deformation Theory (FSDT)
Free vibration analysis of perforated composite cylindrical shell using Generalized Differential Quadrature Method [Volume 7, Issue 3, 2020, Pages 1120-1132]
Flexural properties
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
FML
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
Foam
Polyethylene/ethylene-vinyl acetate copolymer/nanoclay nanocomposite foams with two concurrent phase transitions in continuous extrusion process: Effects of material and processing parameters [Volume 7, Issue 3, 2020, Pages 989-999]
Fractography
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Free Edge Effect
An Experimental Investigation on the Effect of 3-D Stresses at Free Edges on the Failure of Composite Laminates under Distributed Lateral Load [Volume 7, Issue 2, 2020, Pages 843-854]
Free Vibrations
A novel smeared method for investigating the free vibrations of sandwich conical shells with lattice cores [Volume 7, Issue 4, 2020, Pages 1163-1170]
Friction coefficient
Enhanced wear resistance of pure tin by addition of bronze and Fe-C reinforcing particles [Volume 7, Issue 2, 2020, Pages 873-880]
Friction material
Effect of Steel Fibers on Wear Mechanism of Semi-Metallic Brake Pad Composite [Volume 7, Issue 1, 2020, Pages 791-799]
Friction stir alloying
Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM [Volume 7, Issue 4, 2020, Pages 1207-1216]
Friction stir processing (FSP)
Comparison of microstructure, wear resistance, and corrosion behavior of AZ31B/SiO2, AZ31B/graphite, and AZ31B/SiO2/graphite surface composite produced by friction stir processing (FSP) [Volume 7, Issue 1, 2020, Pages 705-713]
Functionally Graded Core
Vibration analysis of truncated conical sandwich shell with porous FG core in different thermal loading [Volume 7, Issue 1, 2020, Pages 694-704]
Fused Deposition Modelling (FDM)
Effect of processing parameters on tensile properties of FDM 3D printed of PLA specimens [Volume 7, Issue 2, 2020, Pages 855-862]
G
Galerkin method
A novel smeared method for investigating the free vibrations of sandwich conical shells with lattice cores [Volume 7, Issue 4, 2020, Pages 1163-1170]
Galerkin method
Global buckling load calculation of the of sandwich conical shells with lattice cores subjected to axial compression loading using a novel smeared method [Volume 7, Issue 4, 2020, Pages 1217-1226]
Global buckling
Global buckling load calculation of the of sandwich conical shells with lattice cores subjected to axial compression loading using a novel smeared method [Volume 7, Issue 4, 2020, Pages 1217-1226]
Graphene
A multi-scale cubic model to calculate the elastic modules of the graphene/polymer nano composites [Volume 7, Issue 1, 2020, Pages 740-746]
Graphene
Investigation of the Effect of Graphene Nano Plates and Carbon Nanotubes on the Improvement of Mechanical Properties of Aluminum Matrix Nanocomposites [Volume 7, Issue 4, 2020, Pages 1197-1206]
H
Heat Activation
Investigation of the Effect of 3D printing parameters on shape-shifting of flat sturctures to Three-Dimensional Shapes [Volume 7, Issue 4, 2020, Pages 1271-1278]
High Order Theory
Vibration analysis of truncated conical sandwich shell with porous FG core in different thermal loading [Volume 7, Issue 1, 2020, Pages 694-704]
High Speed Machining
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
High Strain Rate
Finite element simulation of Hopkinson compression test to investigate the dynamic behavior of composite materials [Volume 7, Issue 4, 2020, Pages 1263-1270]
High-temperature tensile
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
High velocity impact
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
High velocity impact
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
Hybrid
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Hybrid core
Introducing novel sandwich panels based on of cork/polyurethane foam hybrid core and composite grid structure for marine applications [Volume 7, Issue 3, 2020, Pages 1064-1075]
Hybrid sandwich panel
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2020, Pages 1145-1152]
I
Impact
Mechanical properties of multifunctional composite structures with z-pin core using numerical simulation of Hopkinson pressure bar test device [Volume 7, Issue 1, 2020, Pages 683-693]
Impactor Shape
Experimental study of the effect of impact shape and skin layout on the behavior of aluminum foam core sandwich panels at low velocity impact load [Volume 7, Issue 4, 2020, Pages 1153-1162]
Impact strength
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Improved Spring-mass model
Analytical investigation of Low-Velocity Oblique Impact on Composite Cylindrical Shells [Volume 7, Issue 3, 2020, Pages 1106-1119]
In-situ composite"
Study of the phase transformations in Al-V2O5 composite fabricated by spark plasma sintering process [Volume 7, Issue 2, 2020, Pages 949-960]
Iron oxide
Synthesis, characterization and application of mesoporous silica/maghemite nanocomposite in removal of heavy metal ions from aqueous solution [Volume 7, Issue 3, 2020, Pages 1013-1020]
K
Kantrovich Method
An Experimental Investigation on the Effect of 3-D Stresses at Free Edges on the Failure of Composite Laminates under Distributed Lateral Load [Volume 7, Issue 2, 2020, Pages 843-854]
Kevlar
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2020, Pages 1145-1152]
L
Laminated composites
Application of cotton/epoxy laminated composites to fabricate the uni- and bi-directional cosine corrugated cores sandwich panels [Volume 7, Issue 2, 2020, Pages 863-872]
Laser welding
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
Layout
Experimental study of the effect of impact shape and skin layout on the behavior of aluminum foam core sandwich panels at low velocity impact load [Volume 7, Issue 4, 2020, Pages 1153-1162]
Longitudinal damping coefficient
Young modulus and longitudinal damping coefficient of the composite copper reinforced by carbon nanotubes [Volume 7, Issue 2, 2020, Pages 931-940]
Low velocity impact
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2020, Pages 1145-1152]
Low velocity impact
Experimental study of the effect of impact shape and skin layout on the behavior of aluminum foam core sandwich panels at low velocity impact load [Volume 7, Issue 4, 2020, Pages 1153-1162]
Magnetic Properties
Synthesis, characterization and application of mesoporous silica/maghemite nanocomposite in removal of heavy metal ions from aqueous solution [Volume 7, Issue 3, 2020, Pages 1013-1020]
Mechanical milling
Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Energy Storage Capacity [Volume 7, Issue 4, 2020, Pages 1137-1144]
Mechanical properties
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
Mechanical properties
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
Mechanical properties
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Mechanical properties
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2020, Pages 1189-1196]
Melt fluidity
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
Melt fluidity
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2020, Pages 1189-1196]
Mesoporous silica
Synthesis, characterization and application of mesoporous silica/maghemite nanocomposite in removal of heavy metal ions from aqueous solution [Volume 7, Issue 3, 2020, Pages 1013-1020]
Microstructure
Enhanced wear resistance of pure tin by addition of bronze and Fe-C reinforcing particles [Volume 7, Issue 2, 2020, Pages 873-880]
Montmorilonite
Preparation and optimization of Chitosan-Montmorillonite nanocomposite formulations containing Curcumin [Volume 7, Issue 1, 2020, Pages 714-722]
Morphology
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
Multi-functional sandwich panel
Mechanical properties of multifunctional composite structures with z-pin core using numerical simulation of Hopkinson pressure bar test device [Volume 7, Issue 1, 2020, Pages 683-693]
Multi-objective optimization
Experimental Investigation and Integration of Finite Element Analysis and Response Surface Method to Multi-objective Optimization of Geometrical Factors in Bi-layered Al-Cu Tubes Hydroforming [Volume 7, Issue 1, 2020, Pages 661-674]
Multiscales composite
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
Multi-Walled Carbon Nanotube
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
N
Nanoclay
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
Nanocomposite
Synthesis, characterization and application of mesoporous silica/maghemite nanocomposite in removal of heavy metal ions from aqueous solution [Volume 7, Issue 3, 2020, Pages 1013-1020]
Nanocomposite
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Nanocomposite
Polyethylene/ethylene-vinyl acetate copolymer/nanoclay nanocomposite foams with two concurrent phase transitions in continuous extrusion process: Effects of material and processing parameters [Volume 7, Issue 3, 2020, Pages 989-999]
Nanocomposite
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2020, Pages 1189-1196]
Nano graphene
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
Nano silica
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
Nano silica
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2020, Pages 1145-1152]
Nanozirconia
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
Natural fibers
Application of cotton/epoxy laminated composites to fabricate the uni- and bi-directional cosine corrugated cores sandwich panels [Volume 7, Issue 2, 2020, Pages 863-872]
Nonlinear Forced Vibration
Developing homotopy perturbation method to investigate the nonlinear vibration of a Porous FG-Beam subjected to the external excitation [Volume 7, Issue 2, 2020, Pages 907-916]
O
Optimization
Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM [Volume 7, Issue 4, 2020, Pages 1207-1216]
P
Phase analysis
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System [Volume 7, Issue 2, 2020, Pages 917-930]
Piezoelectric patches
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2020, Pages 1243-1254]
Polyacrylonitrile Fibers
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Polyamide 6/Elastomer
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Polyaniline
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Polylactic Acid/Chitosan
The Study of The mechanical, Thermal and Antibacterial Properties of PLA/Chitosan/TiO2 nanocomposite film [Volume 7, Issue 1, 2020, Pages 747-752]
Polymer
Polyethylene/ethylene-vinyl acetate copolymer/nanoclay nanocomposite foams with two concurrent phase transitions in continuous extrusion process: Effects of material and processing parameters [Volume 7, Issue 3, 2020, Pages 989-999]
Polymer matrix composite
Effect of Steel Fibers on Wear Mechanism of Semi-Metallic Brake Pad Composite [Volume 7, Issue 1, 2020, Pages 791-799]
Polymer matrix composite
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
Polyurethane foam
Introducing novel sandwich panels based on of cork/polyurethane foam hybrid core and composite grid structure for marine applications [Volume 7, Issue 3, 2020, Pages 1064-1075]
Porosity
Vibration analysis of truncated conical sandwich shell with porous FG core in different thermal loading [Volume 7, Issue 1, 2020, Pages 694-704]
Porous FG-Beam
Developing homotopy perturbation method to investigate the nonlinear vibration of a Porous FG-Beam subjected to the external excitation [Volume 7, Issue 2, 2020, Pages 907-916]
Pre-strain
Experimental investigation of the effect of shape memory alloy wire embedding on the low-velocity impact behavior of fiber metal laminates composites at different temperatures [Volume 7, Issue 3, 2020, Pages 1057-1063]
Pullout behavior
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy fiber and Polymer Concrete [Volume 7, Issue 4, 2020, Pages 1255-1262]
Q
Q-factor
Young modulus and longitudinal damping coefficient of the composite copper reinforced by carbon nanotubes [Volume 7, Issue 2, 2020, Pages 931-940]
R
Radar absorber
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Radar Absorbing Materials
Design and Develpoment of Polymer Based Composite in Order to Minimize the RCS [Volume 7, Issue 3, 2020, Pages 1047-1056]
Radar Cross Section
Design and Develpoment of Polymer Based Composite in Order to Minimize the RCS [Volume 7, Issue 3, 2020, Pages 1047-1056]
Response surface method
Experimental Investigation and Integration of Finite Element Analysis and Response Surface Method to Multi-objective Optimization of Geometrical Factors in Bi-layered Al-Cu Tubes Hydroforming [Volume 7, Issue 1, 2020, Pages 661-674]
Response surface methodology
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Roughness
Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading [Volume 7, Issue 4, 2020, Pages 1171-1176]
S
S-2 glass/sc15 epoxy composite
Finite element simulation of Hopkinson compression test to investigate the dynamic behavior of composite materials [Volume 7, Issue 4, 2020, Pages 1263-1270]
Sandwich conical shell
A novel smeared method for investigating the free vibrations of sandwich conical shells with lattice cores [Volume 7, Issue 4, 2020, Pages 1163-1170]
Sandwich conical shell
Global buckling load calculation of the of sandwich conical shells with lattice cores subjected to axial compression loading using a novel smeared method [Volume 7, Issue 4, 2020, Pages 1217-1226]
Sandwich Panel Composite
Applying acoustic emission to investigate failure mechanisms on bending of polymer-based composite sandwich panels [Volume 7, Issue 3, 2020, Pages 1029-1039]
Sandwich Panels
Introducing novel sandwich panels based on of cork/polyurethane foam hybrid core and composite grid structure for marine applications [Volume 7, Issue 3, 2020, Pages 1064-1075]
Sandwich shell
Resistance of Singly-Curved Sandwich Shells with Metal Microlattice Core under Transverse Loading [Volume 7, Issue 2, 2020, Pages 897-906]
Scan electron microscope
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
Shape memory alloy fibers
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy fiber and Polymer Concrete [Volume 7, Issue 4, 2020, Pages 1255-1262]
Stability map
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2020, Pages 1177-1188]
Stabilization
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Stacking sequence fibers
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
Stir casting
Investigation of the Effect of Graphene Nano Plates and Carbon Nanotubes on the Improvement of Mechanical Properties of Aluminum Matrix Nanocomposites [Volume 7, Issue 4, 2020, Pages 1197-1206]
Strain Rate
Mechanical properties of multifunctional composite structures with z-pin core using numerical simulation of Hopkinson pressure bar test device [Volume 7, Issue 1, 2020, Pages 683-693]
Strength improvement
Strength improvement by mean of adherend notching and adherend taper in the adhesive single lap joints [Volume 7, Issue 2, 2020, Pages 941-948]
Stress
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Surface composite
Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM [Volume 7, Issue 4, 2020, Pages 1207-1216]
Surface modification
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
Surface nanocomposite
Comparison of microstructure, wear resistance, and corrosion behavior of AZ31B/SiO2, AZ31B/graphite, and AZ31B/SiO2/graphite surface composite produced by friction stir processing (FSP) [Volume 7, Issue 1, 2020, Pages 705-713]
Surface roughness
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Surface roughness
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
T
Temperature
Creep strength of hybrid composites used in power transmission line conductors [Volume 7, Issue 4, 2020, Pages 1227-1234]
Tensile strength
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Tensile strength
Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM [Volume 7, Issue 4, 2020, Pages 1207-1216]
Thermal Analysis
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System [Volume 7, Issue 2, 2020, Pages 917-930]
Thermal cycling
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
Thermal Energy Storage
Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Energy Storage Capacity [Volume 7, Issue 4, 2020, Pages 1137-1144]
Thermal properties
The Study of The mechanical, Thermal and Antibacterial Properties of PLA/Chitosan/TiO2 nanocomposite film [Volume 7, Issue 1, 2020, Pages 747-752]
Thin-walled Composite
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
Tin-matrix Composites
Enhanced wear resistance of pure tin by addition of bronze and Fe-C reinforcing particles [Volume 7, Issue 2, 2020, Pages 873-880]
Titanium Oxide nanoparticles
The Study of The mechanical, Thermal and Antibacterial Properties of PLA/Chitosan/TiO2 nanocomposite film [Volume 7, Issue 1, 2020, Pages 747-752]
Tribological Properties
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Tube hydroforming
Experimental Investigation and Integration of Finite Element Analysis and Response Surface Method to Multi-objective Optimization of Geometrical Factors in Bi-layered Al-Cu Tubes Hydroforming [Volume 7, Issue 1, 2020, Pages 661-674]
Tungsten Disulfide
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Two-phase nanocomposite
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Vibration correlation technique
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique [Volume 7, Issue 2, 2020, Pages 813-822]
Vibration Suppression
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2020, Pages 1243-1254]
W
Wear test
Comparison of microstructure, wear resistance, and corrosion behavior of AZ31B/SiO2, AZ31B/graphite, and AZ31B/SiO2/graphite surface composite produced by friction stir processing (FSP) [Volume 7, Issue 1, 2020, Pages 705-713]
Winkler Foundation
Developing homotopy perturbation method to investigate the nonlinear vibration of a Porous FG-Beam subjected to the external excitation [Volume 7, Issue 2, 2020, Pages 907-916]
Y
Young's modulus
Young modulus and longitudinal damping coefficient of the composite copper reinforced by carbon nanotubes [Volume 7, Issue 2, 2020, Pages 931-940]
Z
Zn/ZnO Nanocomposite
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]